UA-112119270-1

Solar Vent, has a raised cowl and a clear plastic lens outside diameter 215mm, height 50mm after installation.  The cut-out  required for the vent is 120mm.  These vents will extract 11.3 cu ft minimum under full sun.  Can be used in boats, caravans, motorhomes, horseboxes etc.  Powered by the sun, no noise, water resistant and pollution free.


Boat/Caravan fixing - use number 6 stainless steel screws through the eyelets.  Use a suitable recommended mastic as a seal between the plastic ventilator and the surface being used.

Glass Fixing - Solar vents can be fixed into any surface of glass at any angle.  If possible use an equator facing window or roof.

Wall Fixing -  Solar vents can be fitted into a wall or other materials with a thickness greated than 40mm.  Use no 6 screws with suitable raw plugs inserted through the eyelets.  Tube with internal diameter between 116m and 120mm cut to required length.



Write a review

Note: HTML is not translated!
    Bad           Good

Solar Vents Stainless Finish

  • Product Code: 2401
  • Availability: 7
  • £45.60
  • £25.00


Related Products

Butterfly vent stainless steel 4"

Butterfly vent stainless steel 4"

Stainless steel butterfly vent 4" diameter, also available in a 5" diameter..

£3.00 £7.20

Butterfly vent stainless steel 5"

Butterfly vent stainless steel 5"

Stainless steel butterfly vent 4" diameter, also available in a 5" diameter..

£3.00 £7.20

Stainless steel louvred vent 15 louvres

Stainless steel louvred vent 15 louvres

Stainless steel louvred vent, has 15 louvres 228mm x127mm, the vents run vertically down the louvre...

£5.00

Slotted vent stainless steel 1411

Slotted vent stainless steel 1411

Stainless steel slotted vent has 6 louvred vents, 325mm x 76mm..

£10.00

Tags: Solar-vents-stainless-steel